Bridges

Hi Everybody,

As I said in the last posting that I have some photos to show you. They didn't scan as well as I had hoped but they are still good enough. These photos were taken in the late 80's. Sense then, the railroad has gone threw some changes. Sadly, the mill for which mine was modeled after is gone. The siding that went down to street level is still in place and the area that the mill sat on is now a transshipment lot. None of the changes included the bridges.

The first photo is at the south end of the three deck girder bridge north of Gilbertville. This is the bridge that mine was modeled from. Looking at the second photo shows the shoes on the mid-river pier under both girder ends. It was a long walk in from the grade crossing that the railroad crosses before diving into wooded country that follows the river to the river crossing.  I haven't decided yet on what kind of pier and abutment arrangement I'll use. I don't know when the concrete pier was put in but I would guess shortly after the 1937 flooding that nearly wiped the Ware River valley off the map. The B&M's Central Mass branch took heavy damage to the point were the trackage south of Ware To Wheelwright north of Gillbertville was abandoned and trackage rights were obtained from the Boston & Albany to run on the Ware River branch to Wheelwright.

The next bridge going north is the second crossing of the Ware River. It is identical to the one north of Gilbertville but is two decks instead of three. As you can see on the north abutment in the second photo that the concrete has had some weathering to its edges. You can see in the first photo that the bridge uses the same type of shoe on both bridges.

                                                             

There is one more bridge that I'd like to share with you. After the mill siding and the mill are in place, the next bit of trackage will be at the front of the layout. The road that runs out from between the two mill buildings come straight to the edge of the layout. This means another bridge is call for. And it just so happens that the road passes under the north switch of the run around at Barre. This bridge will be a thru-girder with a concrete bottom so the bridge will be a ballasted bridge which I think would be more appropriate under the switch that a open deck would be.

Back before WWII there were three set of tracks running along side of each other leading up to the bridge. On the opposite side of the branch was were the B&M trackage was. It too crossed the highway on their own bridge. The third railroad was the the trolley from Palmer. It was located on the nearside of the branch. Before getting here the trolley track left the railroad embankment and crossed under the railroads in the street and continued on to Ware.

I show you this bridge as it will be what I copy for the over pass. The abutments will be of cut stone. There are many examples of stone railroad bridge abutments all around Western Mass to choose from. I'm thinking of making them using plaster castings.

Hope you enjoyed some of the history of the area of country I live in.

See ya next time.